Micromod MOD: Extended Modbus (XModbus) OPC Server Users Gu Bedienungsanleitung PDF herunterladen (Seite 18)

Extended Modbus OPC Server

Application Tutorial

Figure 3 .3.

Port Properties

• Select the COMM port from the drop-down menu in the Port field and then enable

it by checking the box next to the Enable field.

• Choose the Baud Rate, Parity, Flow Control, Data bits and Stop bits from this

dialog box. Make sure these entries match the settings of the instrument.

• Click on OK to complete the Port configuration.

• The Extended Modbus Device Properties dialog box will redisplay with the port

number. Leave other fields on this dialog box at their default values.

• Click on OK. The added device will be displayed in the Device Tree on the left

frame as shown in the next figure:

Figure 3 .4.

ABB Extended

Modbus OPC

Server database

4. Save the database: The OPC tag database can be save as a file with an extension

.MOPC.

• Select File – Save from the menu bar. Refer to the following figure.

• The Save As dialog box will be displayed next as shown below:

• Choose the same folder where you have saved the PIDLAB database for saving

this file and then type a name for the OPC tag database file in the File name field.

3 - 4

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Keine Kommentare

Micromod MOD: Extended Modbus (XModbus) OPC Server Users Gu Bedienungsanleitung Seite 18