Micromod MOD: ICN OPC Server Users Guide Bedienungsanleitung PDF herunterladen (Seite 31)

ICN OPC Server

Operation and Reference

• Select the COMM port from the drop-down menu in the Port field and then enable

it by checking the box next to the Enable field.

• Choose the Baud Rate, Parity, Flow Control, Data bits and Stop bits from this

dialog box. Make sure these entries match the settings of the instrument.

• Click on OK to complete the Port configuration.

• The ICN Device Properties dialog box will redisplay with the port number. Leave

other fields on this dialog box at their default values.

• Click on OK. The added device will be displayed in the Device Tree on the left

frame as shown in the next figure:

4 - 5

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Keine Kommentare

Micromod MOD: ICN OPC Server Users Guide Bedienungsanleitung Seite 31