Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Bedienungsanleitung PDF herunterladen (Seite 35)

3.2.3 DISPLAYING A MODULE

Refer to Section 3.11 for Keypad function in Module Mode

The navigational sequence would be the following

(Refer to Table 3-5)

•

Select Module Type (then Module, if there’s more than

one Module)

•

Select Page (Skipped when there’s only a single page)

•

Select Parameter

3.2.3.1 Procedure to Display a Module

•

Press the

Mode

button to enter the ENGINEER

mode indicated by the appearance of either

CONFIG-

URE

DISPLAY

PROGRAM

at the bottom of the

display.

•

DISPLAY

does not appear, press F2 until

DISPLAY

appears

•

When

DISPLAY

is shown at the bottom, press F3.

•

Press F2 until

MODULE

appears at the bottom of the

display.

•

Press F3 to enter

MODULE

mode.

•

Press the button, if required, until the pointer

aligns with

SYSTEM

•

The screen should now appear as shown at the top

right.

•

Press F3 to enter the

SYSTEM

module.

•

The list of

SYSTEM

module pages now appear.

•

Press the button to scroll to the

DISPLAY

page.

•

The display should now appear as shown in the right

center screen.

•

Press F3 and the

DISPLAY

page parameters are

shown as the screen to the right shows.

•

The parameter

BRGT

, associated with Datapoint B012

storage location (refer to Section 3.2.2) is displayed as

the second entry in the list of parameters as shown in

screen to the right.

•

Press the

Mode

button to return the instrument to

operator mode.

MODULAR CONTROLLER QUICK START

3-10

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 98 99

Kommentare zu diesen Handbüchern

Keine Kommentare

Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller